Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.4.2 In PROG P1~P36, the speed and incline of each program will be divided into 16 segments. Time
of each segment is divided equally in the setting time. Adjusted speed or incline is only effective in
the current segment. There's 3 buzzer sounds 3sec ahead of the conversion between the
segments. The motor will stop automatically accompanying with a long alert tone after the program
runs the whole 10 segments.
4.4.3 When motor is in running state, press START button to pause the motor. If press the key again,
and the treadmill resume running. Running data and progress still remains.
4.5 When the motor is in running state, press STOP button to stop the motor slowly till it stops smoothly.
All settings will return to the default state.
4.6 When the motor is in running state, press INCLINE +/- to adjust the treadmill incline.
4.7 In any state, the motor will stop urgently when the safety key is pulled out and E-07 display in the
window with a buzzer sound.
4.8 The electric control system is in safety monitoring at any time. The running treadmill will stop in an
emergency when abnormity is found. The screen will display abnormal information and accompany
with alert tone.
4.9 When the screen displays abnormal information, user can press STOP button to erase the
information.
4.10 Body Fat test method (Metric system): Press the PROG key to select BMI, and press MODE key
to select project number. Press handlebar SPEED button +/- to adjust the parameters.
➢ F1 (sex): defined as gender. Parameter range is 1~2. 1 defined as male, 2 defined as female.
Default 1.
➢ F2 (Age): defined as age. Parmeter range is 1~99 years old. Default 25 years old.
➢ F3 (Height): defined as height. Parameter range is 100~220cm. Default is 170cm.
➢ F4 (Weight): defined as body weight. Parameter range is 20~150kg. Default is 70kg.
➢
F5 (BMI): defined the completion of parameter setting and entering into body fat testing state.
Please hold the heart rate sensor of the handlebar by both hands for 4 seconds, body fat
percentage (BMI) of the tested will display in the parameter window.
6. ERP conversion function
The system starts in ERP mode by default. It will enter into dormant state if treadmill does not operate
for 4.5 minutes around to save electricity consumption and can press any key to wake it up. When it's
in standby state, ERP function can be canceled by pressing MODE button for 3 seconds around and
displaying 2222. And it can be back to ERP mode again by pressing MODE for 3 seconds around and
displaying 1111.
7. Buzzer Mute Function
Buzzer function is enabled by default in the system. It can be mute if the screen displays BZ OFF by
pressing PROG & STOP button together when the treadmill is in standby state. And it can be activated
again if the screen displays BZ ON by pressing PROG & STOP button together.
25
Advertenties
Inhoudsopgave
