Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8. Conversion function between kilometers and miles
8.1 Take off the safety key and press PROGRAM and MODE buttons together for a few seconds. The
display shows 0.6, which means the kilometer is converted to mile.
8.2 Take off the safety key and press PROGRAM and MODE buttons together for a few seconds, display
show 1.0, which means the mile is converted to kilometer.
2. Treadmill maintenance
Proper maintenance is very important to ensure a faultless and operational condition of the treadmill.
Improper maintenance can cause damage to the treadmill or shorten the life of the product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced
immediately.
1. Conversion function between kilometers and miles
The treadmill is factory-lubricated. However, it is recommended to check the lubrication of the
treadmill regularly to ensure an optimal operation of the treadmill. Suggestions:
Using time less than 3 hours every week
Using time equal to 4-7 hours every week
Using time more than 7 hours every week
No excessive lubrication. Note: the important factor of increase the
lifetime for treadmill is proper lubrication. The way of checking
whether the running belt need lubrication is, lift the side soft the
treadmill and feel the central back of the belt, as far as possible. If
traces of silicon spray are found, lubrication is not necessary. If the
surface is dry, the belt needs lubrication.
2. Application of lubricant on the belt
●
Stop the running belt, and fold the treadmill. Put up the belt of back
main frame so that the oil can reach the middle position.
●
Spraying silicone oil on the inner side of the running belt and coating silicone oil on both sides of the
running belt.
●
Run the treadmill at a speed of 1km/h to apply silicone evenly. And tread lightly on the running belt from
left to right.
●
Wait several minutes to let the silicon spray spread, before starting the machine.
3. Cleaning
Regular cleaning of the striding belt ensures a long product life.
●
Warning: The treadmill must be turned off to avoid electrical shocks. The
powercordmustbepulledoutofthesocket,beforestartingthecleaningormaintenance.
● After training: Wipe the console and other surfaces with a clean soft and damp cloth to remove sweat
residues.
Caution: Do not use any abrasives or solvents. To avoid damage to the computer, keep any liquids away.
Do not expose the computer to direct sunlight.
Weekly: To make the cleaning easier it is recommended to use a mat for the treadmill. Shoes will leave dirt
on the striding belt that can fall beneath the treadmill. Clean them at under the treadmill once a week.
Lubrication once every 5 months
Lubrication once every 2 months
Lubrication once every month
26
Advertenties
Inhoudsopgave
