Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.Safety key function description:
Safety key is made with the touch switch, clothespin and nylon rope composition, with emergency
shutdown safety precautions. In any state, as long as the safety key is out of its position, the treadmill
stops urgently, console keyboard bans to operate and the screen displays E-07 with prompt sound.
Every time only if the safety key replace to its position, the screen will display all for 2 seconds and the
treadmill will enter into default working state.
3. USER Mode
There're three selections in USER mode USER1~USER3. User can access or set up his/her own
motion program under this mode. Press PROG key to USER mode USER1~USER3, then press
MODE key for setting or press START key to start exercise. User can set up his/her own program in
10-segment of speed and incline by pressing MODE key. After complete setting, user can start the
exercise by pressing START KEY. And user's specified program will be saved and can be accessed
to use directly in next time.
4. Keyboard Operation Description
4.1 Put the power cord to a grounded power outlet with 10 amps. Turn on the power switch, the console
screen displays fully and accompanying with prompt sound, then identificates the safety key.
4.2 Put the safety key in the right position and clip the clothespin to the clothes. The system will enter
into the default working state after the screen displays all for 2 seconds. All counters and setting value
will reset to the original state. The treadmill is in positive timing mode of the manual program P0.
4.3 Press PROG key to select program P0~P36/ U1~U3/ BMI circularly.
4.3.1 P0 is customized program for user. Press MODE key to select four training modes circularly.
Training speed and incline is set by user. Default value of speed is 1.0km/h and default value of
incline is 0%.
◆ Training Mode 1 - Normal: Time, distance and calories are all counted positively, disable
setting function.
◆ Training Mode 2 - Time countdown: Time window flashes under setting state. Press
handlebar SPEED +/- key to modify the setting value. Setting range from 5mins to 99mins and
default 30mins.
◆ Training Mode 3 - Distance countdown: Distance window flashes under setting state. Press
handlebar SPEED button +/- to modify the setting value. Setting range from 1.0km to 99.0km and
default 1.0km.
◆ Training Mode 4 - Calorie countdown: Calorie window flashes under setting state. Press
handlebar SPEED button +/- to modify the setting value. Setting range from 20cal to 9990cal and
default 50cal.
4.3.2 P1~P36 is setting program of the system and only available for the training under the mode of
time countdown. Time window flashes under setting state. Press handlebar SPEED button +/- to
modify setting value. Press MODE button to reset to default. Time setting range is from 5mins to
99mins and default 30:00
4.4 Press START button after complete training mode setting. The screen starts to display a 5-second
countdown and accompanying prompt tone for five times. When counting down to 1, the treadmill
starts gently and slowly accelerate to the displayed speed then go into running with constant speed
smoothly.
4.4.1 Under running state, press handlebar SPEED +/- to adjust the running speed.
24
Advertenties
Inhoudsopgave
