plenty of clean water and consult a doctor immediately. Remove
exhausted batteries/rechargeable batteries from the device
immediately, there is an increased risk of leakage.
Hang or place the radio-controlled clock
securely
The radio-controlled clock is not designed for use in rooms with
high humidity (e.g. bathrooms). Use the supplied dowel and screw
for wall mounting. Before mounting to a wall, make sure that there
are no gas, water or electricity lines at the drilling location. Pay
attention to the condition of the wall. The enclosed mounting
material is not suitable for all types of walls. The manufacturer is not
liable for any damage caused by improper mounting.
Protect sensitive surfaces before setup, otherwise scratches may
occur.
Make sure that:
adequate ventilation is always ensured (do not place the radio-
controlled clock on shelves or where curtains or furniture cover
the ventilation slots (29) and (34) and leave at least 10 cm
space on all sides);
the radio-controlled clock is not placed on a thick carpet or bed
during operation and there are no direct sources of heat (e.g.
heaters) acting on the radio-controlled clock;
no direct sunlight falls onto the radio-controlled clock;
contact with water spray and water drops is avoided;
the radio-controlled clock is not hanging or standing in the
immediate vicinity of magnetic fields (e.g. loudspeakers);
no foreign bodies and dust can enter;
candles and other open flames must be kept away from this
radio-controlled clock at all times to prevent the spread of fire.
- 5 -