Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Changing tools
Your cordless drill has a fully automatic spindle
lock
.
When the motor is stopped, the power train is locked
so that the chuck
can be opened by turning
After you have attached the desired tool and tight-
ened it by turning the chuck
working. The spindle lock is automatically released
when the motor starts (ON/OFF switch pressed
Torque selection ring/drill setting
You can set the torque using the torque selection
ring
.
♦
Select a low level for small screws or soft
materials.
♦
Select a high level for large screws, hard materials
or removing screws.
♦
Select the drill setting for drilling work by adjusting
the torque selection ring to the position .
2 speed gearbox
CAUTION!
►
Only operate the speed selection switch
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear (speed selector switch
position: 1)
you can reach a speed of approx. 400 rpm and
a high torque. This setting is suitable for all screw-
driving.
In second gear (speed selector switch
position: 2)
you can reach a speed of approx. 1300 rpm
for carrying out drilling work.
PABS 16 A1
All manuals and user guides at all-guides.com
.
, you can continue
).
in
in
Operation
Switching on and off
Switching on:
♦
To start the appliance, press the ON/OFF
switch
and keep it pressed in.
The LED work light
ON/OFF switch
is depressed even lightly.
This allows illumination of the work area in low
lighting.
Switching off:
♦
Release the appliance's ON/OFF switch
switch off the appliance.
Adjusting the rotational speed
Pressing the ON/OFF switch
speed. Increasing pressure increases the speed.
NOTE
►
The integrated motor brake ensures rapid
stoppage.
Changing the direction of rotation
♦
Change the direction of rotation by pressing the
rotational direction switch
or right.
illuminates when the
to
lightly yields a low
towards the left
7
GB
IE
Advertenties
Hoofdstukken
Inhoudsopgave
