Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
20 progress
You must adjust the water softener
manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance. The on/off indicator comes
on. Make sure that the appliance is in
setting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
2. Press and hold function buttons (B) and
(C) at the same time until the indicators
of function buttons (A), (B) and (C) flash.
3. Press function button (A).
• The indicators of function buttons (B)
and (C) go off.
• The indicator of function button (A)
continues to flash.
Filling the salt container
All manuals and user guides at all-guides.com
Turn the water hardness dial to the position
1 or 2.
• The end indicator flashes showing the
setting of the water softener.
– The number of flashes of the end
indicator shows the level of the wa-
ter softener.
Example: 5 flashes + pause + 5
flashes = level 5.
4. Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go to
the next level.
5. Deactivate the appliance to confirm.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the
salt container.
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after
you fill the salt container, start a pro-
gramme.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
