Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
20 progress
Filling the rinse aid dispenser
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to 'SETTING
AND STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt
container.
Using the detergent
A
B
30
20
Setting and starting a programme
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when, af-
ter the activation, all the programme indica-
tors are off and the end indicator flashes.
If the control panel shows other conditions,
press and hold the programme button until
the appliance is in setting mode.
All manuals and user guides at all-guides.com
A
B
A
-
+
C
D
A
+
-
C
1. Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no more
than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the re-
leased quantity (B) between position 1
(lowest quantity) and position 4 (high-
est quantity).
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for
the type of load and the degree of soil.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appliance
door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the re-
lease button locks into position.
Starting a programme without delay
start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode.
3. Press continuously the programme but-
ton until the indicator of the programme
you want to set comes on.
4. Close the appliance door. The pro-
gramme starts.
Starting a programme with delay start
1. Set the programme.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
