Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold the programme button
until the programme indicator (A) starts
to flash and the programme indicator (B)
comes on.
4. Wait until the programme indicator (B)
goes off and the end indicator starts to
flash (the programme indicator (A) con-
tinues to flash).
Filling the salt container
All manuals and user guides at all-guides.com
Turn the water hardness dial to the position
1 or 2.
5. Press the programme button.
• The end indicator flashes intermittent-
ly. The number of flashes shows the
level of the water softener, e.g. 5
flashes + pause + 5 flashes = level 5.
6. To adjust the level of the water softener,
press the programme button. Each time
you press the programme button you
go to the next level.
7. Deactivate the appliance to confirm the
setting.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the
salt container.
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after
you fill the salt container, start a pro-
gramme.
progress 19
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
