Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
20. MAINTENANCE
Always disconnect the charging station from the power supply
and read the manual before performing maintenance or fixing
a malfunction.
Only products approved by the supplier can be used to repair or replace
components. Repairs and replacements should always be carried out by a
certified specialist.
Maintenance should always comply with and be carried out in accordance
with NEN3140 and NEN50110 low voltage EU regulations.
Check the charging station for leaks.
Check the connection of the main power cable and ensure a tight
connection, see 19.3.
Treat any damage to the charging station with anti-corrosion paint.
21. TRANSPORTATION AND STORAGE
Transport the charging station (technical core) upright and prevent the paint
from being damaged, as this could cause rust.
The covers may be transported in various ways as long as they are protected
from damage. Preferably store the charging station in a dry, non-humid
space.
When hoisting the charging station into position, there are 2 securing holes
for lifting eyes on the top of each corner of the charging station. The lifting
eyes can be removed after fitting. To ensure a safe work setting, only a
certified fitter may hoist the charging station.
22. RESOLVING PROBLEMS
If the charging station malfunctions, immediately contact the Ecotap®
helpdesk, open 24/7 (telephone number: +31 (0)411 745 020) or a certified
technician who possesses the necessary measuring and en testing
equipment with auto-simulation.
NOTE!
All work on and modifications to the charging station must comply with at
least NEN1010.
23
Advertenties
Hoofdstukken
Inhoudsopgave
