14. INTRODUCTION
Thank you for choosing an Ecotap® DC charger.
This manual describes the DC charger.
This manual contains important information for the proper and safe
installation and operation of the DC charger.
The charging station is designed for vehicles fitted with a mode-4 charging
system in line with IEC 61851-1 (edition 2.0) using a connector jack system as
per VDE-AR-E 2623-2-2 / IEC 62196-2. Together with the vehicle and system,
the charging station will be the best choice for charging the vehicle quickly
and safely.
The entire charging station complies with EU Directive 2014/35/EU relating
to the harmonisation of legislation on electrical equipment within certain
voltage limits (re-rating of all versions issued previously).
This manual provides insight into how to install and operate the charging
station safely. This manual is drawn up to maximise the function and
technical design life of the charging station.
It has been drawn up with the utmost care. However, if there are still any
uncertainties, contact your supplier before installing the charging station.
We can only guarantee the functioning of the charging station if the
charging station is connected by an authorized or certified fitter/technician.
Read this manual carefully before installing and operating this charging
station. Store this manual in the vicinity of the charging station so that
the instructions and safety guidelines are always to hand.
© Copyright
No part of this publication may be copied, reproduced or saved in a retrieval
system without Ecotap® B.V.'s prior written consent.
This is an English translation of the original manual, which was written in
Dutch.
15. GENERAL
15.1 Warranty
The Ecotap® B.V. General Delivery Conditions apply.
Ecotap® B.V. cannot be held responsible for injury or damages as a result of
the charging station being changed, damaged, converted, or expanded with
other components, or if it is not being used in accordance with the specified
instructions and conditions.
17