Advertenties
Beschikbare talen
Beschikbare talen
4.5 Setup location requirements
Für einen sicheren und fehlerfreien Betrieb des Gerätes muss der Aufstellort folgende
Voraussetzungen erfüllen:
•
The device must be set up on a solid, even, horizontal surface capable of suppor-
ting the vacuum sealer and any items to be vacuum-sealed.
•
Select a setup location where children cannot reach the hot sealing strip of the
device.
•
Do not set up the unit in a hot or damp environment or near fl ammable material.
•
To operate correctly, the unit requires suffi cient air fl ow. Leave at least 10 centime-
ters (4 inches) of space on all sides when setting up the unit.
•
Do not move the vacuum sealer when it is in operation.
•
The electrical outlet must be easily accessible so that the plug can be quickly di-
sconnected in the case of an emergency.
•
The setup of this unit in non-stationary locations (e.g., boats, airplanes, motor
homes) must be carried out by a qualifi ed electrician, provided they guarantee the
prerequisites for the safe use of the unit.
4.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following inst-
ructions must be observed for the electrical connection:
•
Before plugging in the unit, compare the voltage and frequency data on the
vacuum sealer's rating plate (found on the bottom of the unit) with that of your
electrical network. This data must be compatible. If in doubt consult a qualifi ed
electrician.
•
Inspect the power cord for damage and ensure it doesn't run under the unit or over
hot or sharp surfaces.
•
The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. If in doubt, consult a qualifi ed electrician.
The manufacturer cannot be made responsible for damages due to a missing or
damaged protective conductor.
CASO VRH 790 advanced Pro
DE
EN
FR
IT
ES
NL
PT
SE
29
Advertenties
