Download Inhoudsopgave Inhoud Print deze pagina

Mounting The Product; Operation; Using As A Led Light; Using As A Charger - Parkside PWLF 2200 A1 Bedienings- En Veiligheidsinstructies

Led-handlamp met powerbank
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

˜ Mounting the product
The product is equipped with 2 magnets
 
With these magnets, the product can be
attached to magnetisable surfaces.
LED panels
can open up (Fig. B). Fold
[
9 ]
 
out the hook
on the product to suspend
[
]
the product from a suitable suspension point
(Fig. D).
˜ Operation
m
RISK OF ACCIDENT! Do not use the product
whilst driving the vehicle. When using the
product in a vehicle, be sure this does not
endanger the driver or the passengers. Always
store and secure the product so that even full
braking does not pose a risk of injury from the
product or product damage.
Turn the LED panels
 
the desired position (Fig. B). The LED panels
can also be turned upwards (Fig. D).
Use and operate the product on a stable
 
surface without any angle.
m
CAUTION! Note the position of your hands
whilst turning the LED panels
pinching your fingers (Fig. E).
The product may be used as a light or as a
 
charger.
NOTE: The energy stored in the rechargeable
batteries power both the LED light and the charging
station. Using the product as a charger therefore
reduces the operating time and brightness in
lighting mode.
10 GB/IE/NI
4 ]
[
and fix the product at
9 ]
[
to prevent
9 ]
[
˜ Using as a LED light
.
Fully charge the product as described in the
 
section "Charging the product".
The product can be operated in 6 different
 
modes. Select these by repeatedly pressing the
ON/OFF switch
ON/OFF switch Mode
Press 1x:
Press 2x:
Press 3x:
Press 4x:
Press 5x:
Press 6x:
Press 7x:
˜ Using as a charger
When used with the USB cable
may be used to charge small electronics devices
with USB socket (Type micro) for charging
(e.g. mobiles or digital cameras).
The charging current the device requires may
 
not exceed 2 A. Carefully read the instructions
for use of the device you wish to charge.
ATTENTION! Charging a device which requires a
higher charging current may cause a defect in both
devices.
.
2 ]
[
Upper light 100 % brightness
Upper light 50 % brightness
Side light 100 % brightness
Side light 50 % brightness
Side light flashing
Side red light flashing
Switch off the light
, the product
[
]

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

392672 2201

Inhoudsopgave