Inhoudsopgave
Advertenties
Overeenkomstigheidsverklaring
according to the EU Machinery Directive 2006/42/EC, Annex II 1. B
Manufacturer
Grundfos Water Treatment GmbH
Reetzstr. 85
DE - 76327 Pfinztal/Söllingen
Description and identification of the partly completed machinery
Product / Article
Type
Serial number
Project number
Commercial name
Order
Function
It is expressly declared that the partly completed machinery fulfils all relevant provisions of the following
EU Directives or Regulations:
2006/42/EC
Reference to the harmonised standards used, as referred to in Article 7 (2):
EN ISO 12100:2010-11
It is also declared that the relevant technical documentation has been compiled in accordance with part B of Annex VII.
The manufacturer or his authorised representative undertake to transmit, in response to a reasoned request by the national authorities, relevant
information on the partly completed machinery. This transmission takes place PDF.
This does not affect the intellectual property rights!
Important note! The partly completed machinery must not be put into service until the final machinery into which it is
to be incorporated has been declared in conformity with the provisions of this Directive, where appropriate.
Pfinztal/Söllingen, 29.05.2017
Declaration of incorporation
for partly completed machinery
DSS System
DDA, DDC, DDE, DDI, DME, DMX, DMH
See nameplate on the machine
2017/03_EN
Cabinet installed dosing system
Standard
The DSS systems consist of one or more dosing pumps which are mounted
together with optional equipment in a cabinet and are always designed
according to customer specifications. A drawing of the DSS system, the
product number, specified materials and components, is delivered with the
DSS system. Keep this drawing with the assembly and operating instructions,
as it contains important specifications for the correct use of the DSS system.
Directive 2006/42/EC of the European Parliament and of the Council of 17
May 2006 on machinery, and amending Directive 95/16/EC (recast) (1)
Published in L 157/24 of 09.06.2006
Safety of machinery - General principles for design - Risk assessment and
risk reduction (ISO 12100:2010)
Stemick, Ulrich
Technical Direktor
Person established in the Community authorised to
compile the relevant technical documentation
Manja Steiner
Grundfos Water Treatment GmbH
Reetzstr. 85
DE - 76327 Pfinztal/Söllingen
Ludmann, Serge
Head of CSU Project Department
1
7
Advertenties
Inhoudsopgave
