Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
RATING PLATE
The machine has a rating plate that shows:
The data identifying the manufacturer;
The data identifying the machine (model and serial number);
Main technical data for use (voltage values and supply frequency).
WIRING INFORMATION
The machine is complete with wiring diagrams provided separately as attachments to this booklet.
NOISE
The pressure level of the sound produced by the machine during normal operation is below 70dB(A).
After unpacking, make sure that:
The machine is undamaged and does not have faults or cracks, dents or damaged parts (if you have any
doubts, DO NOT USE IT and do not hesitate to contact your dealer);
All the parts of the packing must be collected and disposed of properly; keep them out of the reach of
children or irresponsible persons because they are potential sources of danger.
FITTING FEET AND LEVELLING
Use lifting gear that is appropriate to the weight of the machine to lift the appliance off the wooden pallet:
Find the support feet supplied and screw them into the seats on the base;
Use the screws of the feet and a spirit level to ensure that the appliance is perfectly levelled on both
the vertical and horizontal planes.
5 CONNECTION , INSTALLATION AND SUPPLIES
The installation must comply with the regulations in force in the place in which the appliance is installed in
accordance with the manufacturer's instructions.
The installation must be carried out only by professionally qualified persons who are authorized to perform
such tasks.
PLACE OF INSTALLATION
When positioning the machine, make sure that:
The ambient temperature is between 10°c and 35°c;
It is not installed outside;
It is not located in wet environments near sprays or jets of water.
3 TECHNICAL IDENTIFICATION DATA
4 UNPACKING
Advertenties
Inhoudsopgave
Probleemoplossen
