Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cycle start:
By means of the switch or button, select the most suitable washing cycle from among those that can be
preset;
Press the "Cycle Start" button to start the "set washing" cycle. At this point the machine starts the
washing cycle automatically.
During the washing cycle, it is possible to:
On some machine models, before the rinsing cycle starts, select by means of the switch the "rinsing
with hot water" or "rinsing with cold water" modes.
At the end of the washing cycle:
All the machines are set to stop automatically at the end of the washing cycle. The stop is indicated by
the light of the "Cycle Start" button switching off;
At the end of the cycle, open the door, take out the basket with the washed glasses or dishes and remove
these.
At the end of the day:
Switch off the machine;
Move the master switch to "OFF";
Remove the overflow pipe and empty the machine;
Leave the door ajar.
Best operation and long machine life are ensured by careful weekly machine cleaning.
Cleaning must be carried out by authorised personnel trained in such tasks and wearing protective gloves.
Before performing any cleaning or maintenance operations make sure the power and water supplies are
disconnected.
The operator must perform simple regular cleaning and routine maintenance tasks:
Changing the water and cleaning the inside of tank;
Cleaning the tank filter;
Cleaning the nozzles of the washing arms and rinsing rotator.
Changing the water and cleaning the tank
The water must be changed and the tank cleaned regularly at least every 20 cycles.
Removal of dirty water from the tank. This Operation must be performed by removing the overflow pipe
from its housing.
Cleaning the tank. Remove any residues on the bottom of the tank with a sponge and wash with clean
water. For cleaning, use washing-up detergent or water and vinegar solution. Do not use abrasive
detergents or powers that might damage the internal parts. To eliminate any incrustation, use a sponge
or brush with soft plastic bristles.
Door seal cleaning. Using a soft cloth, remove any residues on the door by washing with clean water.
Topping up the washing water level. Fit the overflow pipe back on and top up the water level in the tub
(see "MACHINE USE" paragraph).
7 ROUTINE MAINTENANCE
Advertenties
Inhoudsopgave
Probleemoplossen
