Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WATER SUPPLY CONNECTIONS AND PREPARING FOR WASHING (water loading)
Open the water supply tap;
Fit the plug in the power socket; switch on the machine;
Make sure the door is closed;
From the machine control panel, press the machine switch-on button to run water into the tank.
After about 30/35 minutes the warning-light automatically lights up and the machine is ready for the first
washing cycle.
DETERGENT
The detergent needs to be an absolutely NON-FOAMING type and suitable for use in industrial glass and
dishwashing machines.
We recommend the use of liquid detergents. Correct dosage is most important for achieving good washing
results and for proper operation and long life of the machine. In dosing the detergent, always follow the
manufacturer's instructions. Doses can vary according to the hardness of the water and the amount of dirt-grease
still on the dishes (the greater the hardness and the dirt, the greater the amount of detergent).
Machine without detergent dispenser
The detergent must be added about every five washes in the quantity suggested by the selected supplier:
Open the loading door and introduce the detergent inside the tank;
Close the door again.
Machine with detergent dispenser
The detergent is added automatically during the washing cycle:
Before starting the cycle, make sure there is detergent in the tank and that the suction pipe is emerged
in the detergent.
IMPORTANT: Never soak naked hands in the washing solution containing the detergent.
RINSE-AID
The machine is equipped with a rinse-aid dispenser which works using the machine rinsing pressure. Its quantity
is adjustable by micrometric screw (by turning it clockwise you diminish the quantity, by turning it counter-
clockwise you increase it). We recommend a dose of about 5cm per each cycle as the rinsing product is very
foamy.
NOTE: Upon first installation, it may be necessary to prime the doser in the following way:
Loosen the adjustment screw until it stops press the screw in until the rinse-aid has filled the tube.
BASKET LOADING
In loading the basket with glasses, plates or dishes in general, a number of important factors must be taken into
consideration:
Load the dishes upside down in the baskets in a stable position and possibly without these touching one
another;
Make sure the sprayer arms can turn freely;
Use glasses and dishes suitable for washing in dishwashers;
The plates must be placed in the basket in a forward inclined position;
Push the basket in so it slides on the rollers and make sure it is completely inserted in the machine;
Close the door.
STARTING THE WASHING CYCLE
The start, work function setting and stop of the washing cycle is done by means of the controls on the control
panel on each machine as described in this manual. With the machine ready for cycle start (light indicator on)
perform the following operations in sequence:
Advertenties
Inhoudsopgave
Probleemoplossen
