Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DRAIN PUMP (Optional) (Fig. 2)
If the washing water drainage trap is located high up, we recommend fitting a drain pump. At the time of
ordering, depending on the model, the machine can be supplied complete with a drain pump.
A: Correct installation
B: Incorrect installation
1. Water level in tank
2. Waste pump
3. Drain under the tank level water
4. Pump delivery side
5. Water column for priming the pump
6. Drain over the tank water level
N.B. To empty the tank: Take out the overflow pipe and leave the door open. Then press the "drain pump" button
for at least 2 seconds; the drain pump will start to empty the tank. At the end of the drain cycle , switch off the
machine. During the wash-rinse cycle the excess water is automatically drained out.
REQUEST AND INSTALLATION OF OPTIONAL ACCESSORIES AFTER PURCHASE
Should it become necessary to fit one or more optional accessories, make sure installation is done by
"professional personnel"or "personnel belonging to the nearest after-sales centre".
CHECK FILTER AND OVERFLOW PIPE
With the machine disconnected from the power mains, open the door and remove the basket:
Put the overflow pipe in its seating inside the tank.
Ensure that the filter is properly set into its housing making sure this is properly secured to the bottom
of the machine.
N.B. We recommend that the machine is not used without the filter in place.
Fig. 2
6 USING THE MACHINE
Advertenties
Inhoudsopgave
Probleemoplossen
