Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
■
Only operate the product with the supplied power unit. Only use the power unit for this
product. In the case of a defect, you must exchange the power unit for a power unit of the
same type.
● Setup
Note: Protect sensitive surfaces with an underlay.
□
Place the radio-controlled weather station on a level surface with the foot folded out 9 .
□
Place the outdoor sensor on a level surface. Make sure that the outdoor sensor cannot
topple over. IPX4 protection is not guaranteed if the outdoor sensor is horizontal.
● Wall mounting
The radio-controlled weather station can also be mounted on the wall (suspension eye 5 )
and can be attached with the supplied attachment materials. Observe the structural condi
tions and ensure sufficient ventilation.
The outdoor sensor (suspension eyelet 26 ) must only be used when standing or hanging;
IPX4 protection is not guaranteed if the outdoor sensor is horizontal. For wall mounting, the
outdoor sensor can be attached with the enclosed mounting material. Please observe the
conditions on site and do not exceed the 100 m distance (open field) to the radio-controlled
weather station.
● Start-up
Note: The maximum range between the radio-controlled weather station and the outdoor
sensor is 100 metres. The range might be reduced by obstacles (walls or objects).
Note: Remove all packaging material from the product. Remove all protective films before
first use.
Note: You can install the radio-controlled weather station and the outdoor sensor on a
surface or hang it on a wall using suspension eyes 5 26 .
Note: Ensure sufficient ventilation of the radio-controlled weather station and keep the venti
lation slots free from obstruction 8 .
● Commissioning the outdoor sensor
□
Open the battery compartment 24 on the back of the outdoor sensor by sliding the
battery compartment cover 25 in the direction indicated by the arrow.
Safety / Setup / Wall mounting / Start-up
GB/IE/NI
15
Advertenties
Hoofdstukken
Inhoudsopgave
