Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
RPD50
➤ Take out the contents of the refrigerator.
➤ Place them in another cooling device to keep them cool, if necessary.
➤ Set the knob to "0".
➤ Leave the door open.
➤ Wipe off the water resulting from defrosting or – if present – empty the collecting
tray. If your device has a water drain, drain the thawed water off.
Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
➤ Turn the knob to "0".
➤ Disconnect the power cable from the battery or pull the DC cable plug out of the
rectifier.
➤ Clean the refrigerator (see chapter "Cleaning and maintenance" on page 19).
➤ Put the lock in the VENT position.
This prevents odours from building up.
Securing the refrigerator door
You can prevent the refrigerator door from being opened inadvertently.
➤ Put the locking mechanism on the top of the door to position 1
(fig. 3 1, page 4).
8
Cleaning and maintenance
!
WARNING! Electrocution hazard
Always disconnect the refrigerator from the mains before you clean and
service it.
A
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the refrigerator.
• Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
• Do not use any mechanical tools or any other tools to speed up the
defrosting process.
EN
Cleaning and maintenance
19
Advertenties
Hoofdstukken
Inhoudsopgave
