Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Use
3.6 Maintenance
Centring and tensioning the belt
Within the first weeks of using the treadmill, it is possible that you need to centre the belt.
For example this can happen when applying more pressure to the left foot over your right.
Make sure the treadmills is running with a speed between 3 and 5 KPH. At the back of the
frame there are two adjustment bolts. These bolts allow you to adjust the rear roller. When
the treadmill is running to the left, you need to turn the left adjusting bolt clockwise on the
and the right adjustment bolt counter clockwise. In the event that the treadmill is right, you
have to turn the left adjustment bolt counter-clockwise and the right adjustment screw
clockwise. Make sure the belt stays well tensioned and is not waving.
Increase tention
Decrease tention
70 - Manual Runner DTM2000i Treadmill
Advertenties
Hoofdstukken
Inhoudsopgave
