Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ASSEMBLY STEP 5
HARDWARE FOR STEP 5
PART
TYPE
DESCRIPTION
A
BOLT
M8X1.25PX15L
B
SPRING WASHER
8.2X15.4X2.0T
C
FLAT WASHER
8.4X15.5X1.6T
(STEP E)
5
4
A B C
4
1
16
NOTE: Be careful not to pinch any wires
while assembling the console.
QTY
4
A
Open HARDWARE FOR STEP 5.
4
4
B
Gently place the CONSOLE (5) on top of the CONSOLE
MASTS (1&4). Attach the LEFT SIDE first using 2
BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
C
The CONSOLE CABLES (6) are tucked into the
CONSOLE MAST (4). Using the lead wire carefully pull
the CONSOLE CABLE (6) out of the CONSOLE MAST
(4). Detach and and discard the LEAD WIRE. Connect
6
the CONSOLE CABLES (6) and carefully tuck wires in
masts to avoid damage.
D
Attach the RIGHT SIDE of the CONSOLE (5) using
2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
E
Pull the top of the CONSOLE (5) towards the back of
the treadmill and HOLD while TIGHTENING THE LEFT
AND RIGHT SIDE BOLTS (A).
A
B
ASSEMBLY STEP 6
HARDWARE FOR STEP 6
PART
TYPE
A
SCREW
B
SCREW
C
A
Open HARDWARE FOR STEP 6.
DESCRIPTION
QTY
B
Attach the RIGHT AND LEFT SIDE CONSOLE
4X10L
4
JOINT COVERS (1) using 8 SCREWS (A & B).
4X15L
4
C
REMEMBER to tighten ALL BOLTS & SCREWS
completely now that assembly is finished.
1
A
A
B
B
17
Advertenties
Inhoudsopgave
