Inhoudsopgave
Advertenties
Table 4: Recommended separation distances between portable and
mobile RF communications equipment and the model CanalPro X-Move
The model CanalPro X-Move is intended for use in electromagnetic environment
in which radiated RF disturbances is controlled. The customer or the user of the
model CanalPro X-Move can help prevent electromagnetic interference by main-
taining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the model CanalPro X-Move as recommended be-
low, according to the maximum output power of the communications equipment.
Rated maximum
output power
of transmitter W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recom-
mended separation distance d in meters (m) can be estimated using the equation
applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) accordable to the transmitter manu-
facturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic prop-
agation is affected by absorption and reflection from structures, objects, and
people.
Separation distance according to frequency of transmitter [m]
150kHz to 80MHz
1/2
d=1.2×P
0.12
0.38
1.2
3.8
12
80MHz to 800MHz
1/2
d=1.2×P
0.12
0.38
1.2
3.8
12
800MHz to 2,7GHz
1/2
d=2.3×P
0.23
0.73
2.3
7.3
23
35
Advertenties
Inhoudsopgave
