Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Pairing the Bluetooth with your mobile phone
7.
Select the device "Workstation" in the Bluetooth setting screen of the mobile
phone.
8.
Playing music from your mobile phone in Bluetooth mode
Use the media players in the mobile phone.
9.
Playing music stored in a paired mobile phone from the Workstation radio in
Bluetooth mode
Press the
,
10. Answering an incoming phone call from the Workstation radio
Press the Tuning knob (Phone icon) on the right to pick up and hang up the phone
call.
11. Redialing the last out going phone call in Bluetooth mode
Press and hold the Tuning knob (Phone icon) on the right for more than 2 seconds.
12. Charging a mobile phone from the Workstation radio
Connect the mobile phone to the USB socket on the left side with an appropriate
cable (not included with the radio).
USING THE RADIO FOR THE FIRST TIME
1. Place the radio on a flat surface.
2.
Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3.
Plug the AC power cord into the AC socket. The radio will start up and the display
will show "WELCOME TO DIGITAL RADIO" for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
The display will show "Scanning" in DAB and "Auto" in FM.
4.
When the scan is completed, the 10 strongest FM stations will be stored as presets
and the available DAB stations will be in the list of stations. The radio will switch to
standby with the updated clock and date showing on the display.
5.
If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position with better reception.
and
buttons (preset buttons 3, 4 and 5).
GB
GB
8
Advertenties
Hoofdstukken
Inhoudsopgave
