Download Inhoudsopgave Inhoud Print deze pagina

Software Version; System Reset - PERFECTPRO WORKSTATION Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view
the software version in DAB and FM mode.
1.
Press the On/Off button to switch on the radio.
2.
Press the Source button to select FM or DAB mode.
3.
Press the Menu button until the display shows "Full Scan", and then rotate the
Tuning knob until the display shows "System".
4.
Press the Tuning knob; rotate the Tuning knob until the display shows "SW
version".
5.
Press the Tuning knob to view the software version.
6.
Press the Tuning knob to back to last menu and press menu to return to the
normal radio display.
Note: Software upgrade should be done by qualified service personnel.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
Press the On/Off button to switch on the radio.
1.
2.
Press the Menu button,
3.
Rotate the Tuning knob until the display shows "System". Press the Tuning knob.
4.
Rotate the Tuning knob until the display shows "Factory reset". Press the Tuning
knob.
5.
Rotate the Tuning knob to select between "Yes" or "No". Select "Yes" if you wish to
reset the radio, otherwise, select "No".
6.
Press the Tuning knob to cause the factory reset.
7.
A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values. The display will show "Restarting" for a
few seconds, and then the radio will automatically perform an auto scan of the Band
III DAB channels and the FM band, the display will show "Scanning" at DAB and
"Auto" at FM.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect all batteries and the power supply.
"Under the environment with Conducted Immunity disturbance / Radiated Immunity, the
sample may malfunction. It will automatically recover to normal when the Conducted
Immunity disturbance / Radiated Immunity stopped."
21

Advertenties

Inhoudsopgave
loading

Inhoudsopgave