Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Finding new stations – DAB
From time to time, new stations may become available. You may proceed to find new
stations as follows:
1.
In DAB mode, press the Menu button, "Full scan" shows on the display.
2.
Press the Tuning knob, the radio will perform a scan of the Band III DAB channels.
As new stations are found, the station counter on the right-hand side of the display
will increase and new radio stations found will be added to the list stored in the radio.
Manual Tuning – DAB
Manual tuning is an alternative method of finding new stations. Instead of scanning the
entire Band III channels automatically, you may tune the radio directly to a known DAB
channel and store all the multiplex in that channel into the available station list.
1.
In DAB mode, press the Menu button and rotate the Tuning knob until the LCD
display shows "Manual Tune", then press the Tuning knob. The display will show
DAB channel and Frequency.
2.
Rotate the Tuning knob to select the desired channel or Frequency and press the
Tuning knob to tune to the chosen frequency.
3.
When DAB stations in the tuned channel are found, the display will show the name
of the station. Any new radio stations found will be added to the list stored in the radio.
4. The signal strength display shows the reception of the station. The clear unfilled
rectangle indicates minimum signal level required for satisfactory reception. The
signal strength bars will go up or down showing the changing signal strength as you
adjust the antenna or the position of the radio.
5.
Repeat step 1 to 4 for other channels with new stations.
6.
Press the Menu button twice to exit manual tuning and return to normal DAB
operation.
Dynamic Range Control (DRC) settings – DAB
DRC can make quieter sounds easier to hear when your radio is used in a noisy
environment.
1.
In DAB mode, press the Menu button and rotate the Tuning knob until "DRC
value" appears on the display, press the Tuning knob.
2.
Rotate the Tuning knob to select required DRC setting (default is OFF).
DRC off
DRC is switched off, broadcast DRC will be ignored.
DRC high
DRC is set as sent by broadcaster.
DRC low
DRC level is set to 1/2 that sent by broadcaster.
3.
Press the Tuning the knob to confirm the setting. The display will return to normal
radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does
not support DRC, then the DRC setting in the radio will have no effect.
GB
GB
10
Advertenties
Hoofdstukken
Inhoudsopgave
