Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Prune stations – DAB
If you move to a different part of the country, some of the stations that were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. The Prune stations function will
delete the unavailable DAB stations from your station list.
1.
In DAB mode, press the Menu button.
2.
Rotate the Tuning knob until the display shows "Prune".
3.
Press the Tuning knob to enter the setting.
4.
Rotate the Tuning knob to select between "Yes" or "No" (default is No). Select
"Yes" to enable this function if required, otherwise, select "No".
5.
Press the Tuning knob to confirm your setting. The display will return to last menu
and press menu to go to the normal radio display.
Note: If you have moved the radio to a different part of the country, you should also carry
out a search for new stations (please see the section "Finding new stations – DAB").
FM MODE
Operating the radio – FM seek station
1.
Press the On/Off button to turn on the radio.
2.
Select the FM waveband by pressing the Source button.
3. If this is the first time to switch to FM mode, the station in preset 1 will be played. If
the radio has been used before, the last listened station will be played.
4.
To seek station, press the Tuning knob. The scan stops automatically when it finds
a station of sufficient strength.
5.
After a few seconds, the display will update and show station name if RDS
information is being received.
6. To find the next station, press the Tuning knob again.
7.
To seek stations in an opposite direction, rotate the Tuning knob clockwise (to scan
from low frequency to high frequency) or rotate counter clockwise (to scan from
high frequency to low frequency), and press the Tuning knob.
8.
When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
11
Advertenties
Hoofdstukken
Inhoudsopgave
