Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Bluetooth Options
The Bluetooth function can be set to operate in different ways as below:
1.
In Bluetooth mode, press the Menu button to enter the system setting.
Rotate the Tuning knob until "Bluetooth" is displayed; press the Tuning knob.
2.
3.
Rotate the Tuning knob to select "BT always on", "BT mode only" or "Disconnect
BT" options, and press the Tuning knob to select the setting.
a.
BT always on
b.
BT mode only
c.
Disconnect BT
Note: The volume settings of your mobile phone influence the volume of the music
streaming and the volume of the incoming phone calls on the Workstation radio.
The Auto-Power management function will be activated in Bluetooth mode. If there
is no signal from Bluetooth for a period of over 15 minutes, the Workstation radio will
automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
Bluetooth LED configuration
1.
Press the On/Off button to turn on the radio.
2.
Press the Menu button, and then rotate the Tuning knob until the display shows
"System".
3.
Press the Tuning knob; rotate the Tuning knob until the display shows "Bluetooth
LED".
4.
Press the Tuning knob to enter the Bluetooth LED adjustment menu.
5.
Rotate the Tuning knob to select "on" (by default) in order to keep Bluetooth LED
lightened when connected;
6.
Or rotate the Tuning knob to select "off" to turn off Bluetooth LED when Bluetooth
connection has been established.
Press the Tuning knob to confirm your choice.
7.
15
Bluetooth is turned on when the Workstation radio is on. You
can playback music in the Bluetooth mode and use the
Hands-Free-Calling feature to answer incoming phone calls
in all operation modes, for example, also when you are
listening to the radio. As an indication, the blue Bluetooth
connected LED will be on in all operation modes (FM, DAB,
Bluetooth and AUX IN).
Bluetooth is turned on only in Bluetooth mode. You can
playback music and use the Hands-Free-Calling feature to
answer incoming phone calls in the Bluetooth mode only.
As an indication, the blue Bluetooth connected LED will be
on only in the Bluetooth mode.
Bluetooth will be disconnected from your mobile phone
and enter the "discoverable mode" (The blue Bluetooth
connected LED will start blinking until a new pairing is
established). This is to allow the Bluetooth pairing to another
device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is
switched off and on again.
Advertenties
Hoofdstukken
Inhoudsopgave
