DAB MODE (DAB – DAB+)
Operating the radio – DAB
1.
Carefully extend the antenna. Press the On/Off button to switch on the radio.
2.
Select the DAB waveband by pressing the Source button.
3. The first station in the list of stations found will be played. The display will show the
station name. If the radio has been used before, the last used station will be selected.
4.
If no DAB signals are detected, "No stations available" will be displayed. It may
be necessary to relocate the radio to a position with better reception. You should
then carry out an auto scan to find stations, please refer to the section "Finding
new stations - DAB".
Selecting a station – DAB
1.
Press the On/Off button to switch on the radio.
2.
Select the DAB waveband by pressing the Source button.
3.
The display will show "Connecting" for a few seconds.
4.
The display shows the name of the radio station currently selected.
5.
Rotate the Tuning knob to scroll through the list of available stations.
When the desired station name appears on the display, press the Tuning knob to
6.
select the station.
Note: If after selecting a station the display shows "No stations available", it may be
necessary to relocate the radio to a position with better reception.
Display modes – DAB
In DAB mode, the radio can display a range of information on the display.
Press the Info button to cycle through the various modes.
a.
Scrolling text
b.
Signal strength
c.
Program type
d.
Multiplex name
e.
Channel & frequency
f.
Bit rate & audio format Displays the digital audio bit rate and audio format.
g.
Time & date
9
Displays scrolling text message e.g. station information,
artist/track name, phone-in number, etc.
Displays the signal strength of radio reception. The clear
unfilled rectangle indicates minimum signal level required
for satisfactory reception.
Displays the type of station being listened to e.g. Pop,
Classic, News, etc.
Displays the name of multiplex to which the current station
belongs.
Displays the channel number and frequency for the
currently tuned DAB station.
Displays the current time and date.