Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Startup / Operation
Take your caravan or trailer outdoors. We sug-
gest you choose a large area with sufficient safety
margin to people and objects until you have
enough experience in operating the MoveControl.
Be carefull that no one is in the
moving area while mamoeuvring the
caravan!
Also check on the side of the cara-
van which turned away from you.
Keep a safe distance during moving.
Always keep sufficient distance of
the friction rollers after maintenance
or cleaning.
Switching plant absolutely current-
freely
against roll away at works in the
area of the friction rollers.
B1 Turn ON System
Turn ON the isolation switch.
Make sure that both drive units have
been disconnected from the vehicle tyres.
B2 Turn ON MoveControl
Activate the MoveControl by means of a
double click on the I/O key at the remote
control (ON) - the LED will be lighting.
Check the function of the MoveControl by
pushing the buttons on the remote
control.
GB8
and
safeguarding
Caution: If the driving rollers will not turn, the
reset procedure must be effected at the base
station or a resynchronisation of the remote con-
trol and the receiving unit (base station) must be
effected.
B3 Engaging the friction rollers:
First, travel the friction rollers to the tyres using
the remote control.
Simultaneously push the two arrow keys on the
remote control and keep them pressed until the
driving rollers are completely extended:
As soon as the final position is reached, the
MotorDrive will be switched-off automatically.
Only in this position the moving process is
vehicle
allowed to!
Undo the handbrake of your caravan.
B4 Moving
If no key should be actuated within 20 seconds,
the remote control will be switched-off automati-
cally and must be switched-on again.
+
Now you can execute the
movements according to the
symbols shown on the remote
control.
The
vehicle
moves as long as you keep the
buttons pushed down.
only
Advertenties
Hoofdstukken
Inhoudsopgave
