Inhoudsopgave
Advertenties
Cooker drawer
Removing and inserting the oven door
Completely open the oven door and rotate the attachment clips
completely backwards (fi gure 1).
• Slowly close the door until the clips are pressed against the
supports / seats. At approximately 15° (relative to the closed
door position), pull the door slightly upwards and pull them out
of the both hinge supports on the appliances (fi gure 2).
• Replace the door in the reverse order. Insert the door under
fi gure 1
an angle of 15° into the hinge supports at the front side of the
appliance and push them downwards and to the front until they
slide into their supports / seats.
• Then, completely open the door and rotate the attachment
clips back to their initial position. Slowly close the door and
check, if they close properly. If the door does not open or close
correctly, make sure whether the hinge notches are correctly
placed in their seat hinges.
Attention
fi gure 2
Always make sure the hinge attachment clips are fi rmly seated in
their supports when installing the door. If this is not the case, the
main hinge that is operated by a strong spring may be released
any time while installing or removing the door. Risk of physical
injury.
• Cooker drawer is protected against accidental opening. If you
wish to open the drawer, raise it slightly. In order to remove the
drawer, fi rst pull it out to the stopper, then raise it again and
pull it out completely.
• Do not store fl ammable, explosive, or temperature-sensitive
objects and materials in the cooker drawer.
• Insert the drawer by inserting the wheels into the guides and
close the drawer.
67
Advertenties
Hoofdstukken
Inhoudsopgave
