Inhoudsopgave
Advertenties
44
• When the appliance is connected to the power supply or after a
power failure, the word "META" or "GLAS" is fi rst displayed for a
short while; then, the display fl ashes for some time. In order to
enable the operation of the oven, use the (C) and (D) sensor keys
to set the time of day.
• Each press / activation of a sensor key is acknowledged by a beep.
• Select the type of setting you wish to make by pressing the (A)
sensor key. The selected symbol on the display fl ashes quickly,
indicating the function that you can set or change. After fi ve
seconds, the symbol starts fl ashing more slowly and the time
set is displayed. The symbols that are lit are selected, but not
currently shown on the display (6). The most recent setting made
is always displayed.
• If one of the value settings sensor keys (C) or (D) is touched and
kept pressed, the rate at which the value being set is changing will
increase.
• In case of a power failure which lasts less than two minutes, all
settings remain active.
To improve the response of the sensor keys, touch them
with a larger surface of your fi nger.
• Temperature and other settings may also be set using a special
knob that replaces touching the program timer sensor keys
('+' higher, '-' lower).
Setting the time of day (clock)
• Set the clock to the current time of day by pressing the settings
selection sensor key (A). Then, select the symbol (4).
• Use the (C) and (D) sensor key to set the exact time of day.
• Confi rm the setting by pressing the (A) sensor key again; if the (A)
key is not pressed, the setting is automatically confi rmed after a
few seconds.
Setting the timer functions
In addition to setting the temperature, the electronic program
timer can also be used to set the timer functions. Both settings are
indicated on the same display. Require display is set by pressing the
relevant sensor key (A) or (B).
The program timer can be used to program the oven operation
in three ways:
• Cooking time setting - immediate start of oven operation; after a
set period of time, the oven is turned off automatically.
• Cooking end time setting - the time at which oven operation is to
end is set.
• Delayed start setting - automatic start and end of oven operation
at a selected time.
Advertenties
Hoofdstukken
Inhoudsopgave
