Operating the oven
Setting the oven
temperature
Display dimmer
Between midnight and 6 AM, the display automatically lights with
less intensity, if no timer function is set.
Deleting the timer settings
- All timer settings can be deleted any time by pressing the (C)
and (D) sensor keys simultaneously and holding them for three
seconds. The set programs are automatically interrupted and the
timer switches to display of the current time of day.
- Any timer setting can also be deleted in the following way:
selecting it using the (A) sensor key, then press the (C) and (D)
sensor keys simultaneously. Another way to delete a setting is by
setting the timer value to "0.00".
The oven is controlled by the operation mode selection knob and
the electronic program timer with temperature display.
Rotate the operation mode selection knob to the desired cooking
mode. The operation mode and the preset temperature will
appear on the timer display. The oven starts to operate.
Use the electronic program timer to set the cooking temperature:
• As soon as the selector knob (operation mode selection knob)
is turned, the relevant cooking mode and the preset tempera-
ture are displayed; the symbol "°C" will fl ash for a few
seconds.
• As long as the symbol "°C" is fl ashing, the sensor keys (C) and
(D) can be used to set the required temperature in the interval
from 30-99 °C, in 5 °C steps. Each time the sensor key is
pressed, the temperature is changed by one step (5 °C); if the
sensor key is pressed and held, the rate at which the value is
changing will increase.
• Rising actual oven temperature is indicated on the display,
in 5 °C steps. As long as the oven temperature is less than
30 °C, "---°C" will be displayed. Symbol (9) is also displayed,
indicating the operation of the heaters.
• When the set temperature is reached, the symbol (9) will go
off, and a short beep will sound.
• During cooking, the temperature is maintained by occasional
activation of the heaters; each time this happens, the symbol
(9) appears.
• Cooking temperature may be changed any time by touching the
(B) sensor key, which makes the "°C" symbol fl ash for a while,
47