Cleaning Accessories; Cleaning The Hob - Beko FBM6202X NL Gebruikershandleiding

Verberg thumbnails

100

Inhoudsopgave

Advertenties

• Cleaners sprayed/applied to the surface

should be cleaned immediately. Abrasive

cleaners left on the surface cause the

surface to turn white.

Enamelled surfaces

• The oven must cool down before clean-

ing the cooking area. Cleaning on hot sur-

faces shall create both fire hazard and

damage the enamel surface.

• After each use, clean the enamel sur-

faces using dishwashing detergent,

warm water and a soft cloth or sponge

and dry them with a dry cloth.

• If your product has an easy steam clean-

ing function, you can make easy steam

cleaning for light non-permanent dirt.

(See "Easy Steam Cleaning [} 45]".)

• For difficult stains, an oven and grill

cleaner recommended on the website of

your product brand and a non-scratching

scouring pad can be used. Do not use an

external oven cleaner.

Catalytic surfaces

• The side walls in the cooking area can

only be covered with enamel or catalytic

walls. It varies by model.

• The catalytic walls have a light matte and

porous surface. The catalytic walls of the

oven should not be cleaned.

• Catalytic surfaces absorb oil thanks to its

porous structure and start to shine when

the surface is saturated with oil, in this

case it is recommended to replace the

parts.

Glass surfaces

• When cleaning glass surfaces, do not use

hard metal scrapers and abrasive clean-

ing materials. They can damage the

glass surface.

• Clean the appliance using dishwashing

detergent, warm water and a microfiber

cloth specific for glass surfaces and dry

it with a dry microfiber cloth.

• If there is residual detergent after clean-

ing, wipe it with cold water and dry with a

clean and dry microfiber cloth. Residual

detergent may damage the glass surface

next time.

• Under no circumstances should the

dried-up residue on the glass surface be

cleaned off with serrated knives, wire

wool or similar scratching tools.

• You can remove the calcium stains (yel-

low stains) on the glass surface with the

commercially available descaling agent,

with a descaling agent such as vinegar or

lemon juice.

• If the surface is heavily soiled, apply the

cleaning agent on the stain with a sponge

and wait a long time for it to work prop-

erly. Then clean the glass surface with a

wet cloth.

• Discolorations and stains on the glass

surface are normal and not defects.

Plastic parts and painted surfaces

• Clean plastic parts and painted surfaces

using dishwashing detergent, warm wa-

ter and a soft cloth or sponge and dry

them with a dry cloth.

• Do not use hard metal scrapers and ab-

rasive cleaners. They may damage the

surfaces.

• Ensure that the joints of the components

of the product are not left damp and with

detergent. Otherwise, corrosion may oc-

cur on these joints.

9.2