Inhoudsopgave
Advertenties
• Power cable plug must be within easy
reach after installation (do not route it
above the hob). Do not use extension or
multi sockets in power connection.
• and must use the appropriate socket out-
let/line and plug for oven. In case of the
product's power limits are out of current
carrying capability of plug and socket
outlet/line, the product must be connec-
ted through fixed electrical installation
directly without using plug and socket
outlet/line.
If your appliance has a cord and plug:
Perform the electrical connection of your
appliance by plugging it to a grounded
socket.
4.3 Gas connection
General warnings
• There is risk of explosion, fire and toxica-
tion could be occur if installation, repair
or connection are made from unauthor-
ised/unlicensed/ unqualified person or
technician.
• Before placing the product, make sure
that the local distribution conditions (gas
type and pressure) and whether the
product gas setting complies with these
conditions. Gas adjustment conditions
and values of the product are located on
the labels (or type label).
• If your country code is not on the label,
follow the local technical instructions for
your country for gas connection and con-
version.
• Product can be connected to gas supply
system only by an authorised/licensed/
qualified person or technician.
• Manufacturer shall not be held respons-
ible for damages arising from procedures
carried out by unauthorised/unlicensed/
unqualified person or technician.
• Before starting any work on the gas in-
stallation, disconnect the gas supply.
There is the risk of explosion!
• If you need to use your product later with
a different type of gas, you must consult
the authorised/licensed/ qualified person
or technician for the related conversion
procedure.
• Make sure that the gas connection is
checked well for tightness after each
use. The manufacturer cannot be held re-
sponsible for any damages that may
arise due to gas leakage that may occur
as a result of gas connection or conver-
sion made by unauthorized/non-licensed
persons.
Risks of fire:
• If you do not make the connection ac-
cording to the instructions below, there
will be the risk of gas leakage and fire.
Our company cannot be held responsible
for damages resulting from this.
• Gas connection must be made by an au-
thorised/licensed/ qualified person or
technician only.
• Make sure that the gas hose to be used
in the gas connection complies with the
local gas standards.
• The flexible gas hose must be connected
in a way that it does not contact the mov-
ing parts and hot surfaces (shown below
figures) around it and is not trapped
when the moving parts are travelling.
(e.g. drawers). Besides, it should not be
placed in spaces where it might get
squeezed.
• Do not move the product whose gas con-
nection is complete. If it is moved, there
may be a risk of gas leakage.
• A spanner must be used for gas connec-
tion and conversion.
• A spanner must be used for gas connec-
tion.
Choosing the gas connection side
• The gas hose should be connected by
making wide-angle turns against the pos-
sibility of breaking and folding during the
connection.
• The gas hose should not be crushed, fol-
ded, pinched, touched by sharp corners
or come into contact with hot parts of the
EN / 26
EN
NL
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
