Inhoudsopgave
Advertenties
˜ Operation
˜ Receiving the DCF radio time signal
Insert a 1.5 V AA / LR6 battery with the correct polarity into the battery
7 ]
[
compartment
The wall clock automatically starts to search for the DCF radio time signal. This
process takes about 3 to 12 minutes to complete.
Within 4 minutes, the hands will move to 12 o'clock. The radio signal reception
is initiated once all the hands have moved to the 12 o'clock position. After 3 to
10 minutes, the clock will receive the signal and set itself to the exact time.
The reception of the DCF radio time signal by the wall clock can also be started
manually.
Press and hold the REC button
receive the DCF radio time signal. This process takes a few minutes to complete.
Note: If the wall clock was not able to receive the DCF radio time signal because of
errors, e.g. due your location to being at too great a distance from the transmitter or
for other reasons, you can set the time manually. The manually set value is overwritten
as soon as reception of the DCF radio time signal is successful.
Note: For products intended for Latvia, the display stops at "01:00".
on the back of the product.
5 ]
[
at least 5 seconds. The wall clock attempts to
GB/IE/NI
13
Advertenties
Hoofdstukken
Inhoudsopgave
