Advertenties
15. TROUBLESHOOTING
Problem
1. The machine is not starting.
2. Uneven cut
3. Abnormal vibrations during
use.
4. The icon (fig. 9.B) remains lit
and the battery LEDs 2 and
5 continue to flash.
Pushbutton panel type "I"
and "II"
Pushbutton panel type
"III"
5. The icon (fig. 9.L) flashes.
All other indicators in the
push-button panel (icon/
LEDs) remain operational
and visible.
Cause
Low battery.
The cutting means
are not sufficiently
sharpened.
The travel speed is too
high compared to the
height of the grass.
The cutting-means
assembly
is full of grass
The cutting means are
unbalanced.
The cutting means are
loose.
Loose parts.
Potential damages.
Current overload from
the battery due to:
1. Excessive working
conditions.
2. Slope too steep.
Overheating pre-alarm
of the Battery, the drive
motor and/or motors
of the cutting means
due to:
1. Heavy working
conditions.
EN - 27
Solution
Recharge the battery (par. 8.2.2).
Please contact an authorised service
service centre.
Reduce the travel speed
and/or increase the cutting height:
Wait for the grass to dry.
Clean the cutting-means assembly
Please contact an authorised service
centre for inspections,
replacements or repairs.
Reduce the travel speed
Increase the cutting height:
Reduce the travel speed and check the gradient of
the terrain you are working on.
Reduce the travel speed
Increase the cutting height:
Advertenties
