Inhoudsopgave
Advertenties
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless Blower
•
Original operating instructions
•
Safety instructions
3. Proper use
This device is designed for the general ventilation
of household rooms.
Protect the equipment from rain and damp con-
ditions.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Motor power supply: .............................. 18 V DC
Max. air speed: ........................................15 km/h
Fan size: .....................................................32 cm
Weight: .......................................................3.4 kg
Important!
The equipment is supplied without rechargeable
batteries and without a charger and is allowed to
be used only with the lithium-ion batteries of the
Power X-Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with Power
X-chargers.
Anl_GE_CF_18_320_P_Li_SPK13.indb 14
Anl_GE_CF_18_320_P_Li_SPK13.indb 14
GB
5. Before starting the equipment
5.1 Assembling the fan
1. Fig. 2/Fig. 3a: Connect the pedestal (Item
4) to the tubular stand (Item 5). To do this,
the spindle on the stand (Item 5a) must be
aligned with the hole (Item 4a). Otherwise
assembly is not possible.
2. Fig. 3b: Screw the tubular stand (Item 4) tight-
ly onto the pedestal (Item 5) with the socket
head screw (Item 15). Use the multipurpose
hex key (Item 14) to do this.
3. Fig. 4a: Place the rear safety grille (Item 8)
onto the motor unit (Fig. 2/Item 9). When do-
ing this, please note the anti-twist lock on the
motor unit (Item 9a) and the safety grille (Fig.
2/Item 8a).
4. Fig. 4b: Fasten the rear safety grille (Item 8) to
the motor unit using the locknut (Item 12).
5. Fig. 4b/Fig. 5a: Place the fan impeller (Item 7)
on the motor shaft (Item 11). When doing this,
please note the anti-twist lock on the motor
shaft (Item 11a) and the fan impeller (Fig. 2/
Item 7a).
6. Fig. 5b: Secure the fan impeller (Item 7) using
the locknut (Item 13) – left-handed thread!
7. Fig. 6a/Fig. 6b: Fit the front safety grille (Item
6) onto the rear safety grille (Item 8) so that
the mark shown in Item 6a lines up opposite
Item 8a. Then twist the front safety grille so
that the mark shown in Item 6a is lined up op-
posite Item 8b.
8. Fig. 6c: Screw the front safety grille onto the
rear safety grille where marked on the op-
posite side. In doing so, make sure that the
holes on both safety grilles are aligned. Use
the retaining screw for the safety grille (Item
16) and the multipurpose hex key (Item 14) to
screw it on.
5.2 Fitting the battery (Fig. 7)
Press the pushlock button (b) of the battery as
shown in Fig. 7 and push the battery (a) into the
mount provided. Make sure that the pushlock
button engages properly! To remove the battery,
proceed in reverse order!
5.2 Charging the lithium battery pack
(Fig. 7/8)
1. Pull the battery pack (a) out of the battery
mount, pressing the pushlock button (b)
downwards as you do so.
2. Check that your mains voltage is the same as
that marked on the rating plate of the battery
- 14 -
12.08.2024 13:11:45
12.08.2024 13:11:45
Advertenties
Inhoudsopgave
