Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 11)
1. Danger! - Read the operating instructions to
reduce the risk of injury.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
This equipment can be used by
children of 8 years and older and
by people with limited physical,
sensory or mental capacities or
those with no experience and
knowledge if they are supervised
or have received instruction in
how to use the equipment safe-
ly and understand the dangers
which result from such use.
Children are not allowed to play
with the equipment. Unless su-
pervised, children are not allo-
wed to clean the equipment and
carry out user-level maintenance
work.
Anl_GE_CF_18_320_P_Li_SPK13.indb 13
Anl_GE_CF_18_320_P_Li_SPK13.indb 13
GB
•
Use the appliance only after it is completely
assembled.
•
Never use the appliance if the safety grille is
missing or damaged.
•
Never cover the safety grille or block the fan
impeller.
•
Do not use the appliance in rooms in which
inflammable materials (for example solvents,
etc.) or gases are used or stored.
•
Do not use the appliance near an open flame
or smoldering ash.
•
Do not leave the appliance unsupervised
when in operation.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Fan head
2. Telescopic tubular stand
3. Lock nut
4. Fixed tubular stand
5. Pedestal
6. Front safety grille
7. Fan impeller
8. Rear safety grille
9. Motor unit
10. Control panel
11. Motor shaft
12. Rear safety grille locknut
13. Fan impeller locknut
14. Multipurpose hex key (Internal hexagon/Phil-
lips head)
15. Socket head screw with washer and spring
washer
16. Retaining screw for safety grille
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
- 13 -
12.08.2024 13:11:45
12.08.2024 13:11:45