Cleaning, Care And Maintenance; Troubleshooting - Stiebel Eltron SBB 600 WP SOL Handleiding Voor Bediening En Installatie
Staande warmwater
Verberg thumbnails
Zie ook voor SBB 600 WP SOL:
- Handleiding voor bediening en installatie (96 pagina's)
Inhoudsopgave
Advertenties
OPERATION
CLEANING, CARE AND MAINTENANCE
4.
Cleaning, care and maintenance
f Have a contractor regularly check the appliance, the safety
f
assembly and all fitted accessories.
f Never use abrasive or corrosive cleaning agents. A damp
f
cloth is sufficient for cleaning all plastic parts.
Signal anode consumption indicator
Material losses
!
If the consumption indicator changes colour from white to
red, have the signal anode checked by a heating contrac-
tor and if necessary replaced.
Signal anode consumption indicator
1 white = anode OK
2 red
= check by heating contractor required
Scaling
f Almost every type of water deposits limescale at high tem-
f
peratures. This settles inside the appliance and affects both
the performance and service life. The indirect coils and fitted
accessories should therefore be descaled from time to time.
A heating contractor who knows the local water quality will
tell you when the next service is due.
f Check the taps/valves regularly. You can remove limescale
f
deposits at the tap outlets using commercially available des-
caling agents.
5.
Troubleshooting
Telephone your contractor.
To facilitate and speed up your enquiry, please provide the serial
number from the type plate (000000-0000-000000):
16
| SBB 600-1000 WP SOL
1
2
000000-0000-000000
Made in Germany
WWW.STIEBEL-ELTRON.COM
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
