Advertenties
Mains Model
•
Make sure the electrical characteristics of the machine (voltage, frequency,
power) given on the nameplate correspond to those of the mains electricity
supply.
•
Make certain the power sockets to which the machine is connected are
properly earthed and protected by a 2-pole thermal magnetic switch with
•
Rated current 10-16A
•
•
Icn breaking capacity: 6000 A
•
•
Do NOT move or transport the machine by tugging on the power cable. Do
not use the cable as a handle. Ensure the cable is not trapped by a door or
pulled around sharp or objects or corners. Do not run over the power cable
with the machine. Keep the power cable well clear of hot surfaces.
•
Do NOT unplug the machine from the socket by tugging on the cable. Grip
the plug, not the cable, to disconnect the machine.
•
NEVER touch the power cable with wet hands.
•
This equipment must be earthed. In the event of a malfunction or failure, the
earth connection provides the path of least resistance for electrical current,
reducing the risk of electric shock.
•
Mains powered versions come with a three-wire cable and a three-pin
earthed plug for use in a suitable earthed socket. The earth wire is yellow
and green. Never connect this wire to anything other than the earth terminal
of the socket.
•
The plug must be inserted into a suitable socket, correctly installed and
wired in accordance with local building regulations.
•
Incorrect wiring or failure to connect the machine's earth wire may lead to
a risk of electrocution.
•
If in doubt about the proper earthing of the power socket, have it checked
•
compatible with this same plug. If the power socket needs to be replaced,
compatible with this same plug. If the power socket needs to be replaced,
have the job done by a professional electrician. .
• •
Use of adapters with the machine's mains power plug is strictly forbidden.
Use of adapters with the machine's mains power plug is strictly forbidden.
• •
To avoid the risk of electric shock, use only the extension cable supplied
To avoid the risk of electric shock, use only the extension cable supplied
with the machine.
with the machine.
•
Take care to prevent the rotating brush from coming into contact with the
extension power cable.
•
To reduce the risk of personal injury caused by the connection between the
plug of the machine power cord and the extension cable working loose,
check periodically that the connection is secure. Using an extension with a
, and use only sockets
, and use only sockets
EN
10
Advertenties
