Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
14. Check the compressor for damage
- Before using the compressor again, check the
safety devices or any slightly damaged parts to
ensure that they are in good working order. Check
that the moving parts are working correctly, that
they do not jam, and that no parts are damaged.
Make sure that all parts are fitted correctly, to
ensure that the equipment remains safe to use.
Unless otherwise stated in the operating in-
structions, damaged guards and parts have to
be repaired or replaced by a customer service
workshop. Damaged switches have to be replaced
by a customer service workshop.
15. Important!
- For your own safety, use only such accessories
and auxiliary equipment as are listed in this ma-
nual or which are recommended and specified by
the manufacturer. There is a high risk of suffering
a serious accident if you use tools or accessories
which are not listed in this manual or in the catalo-
gue of recommended tools and accessories.
16. Have an electrician carry out repairs
- Repairs are to be carried out only by a qualified
electrician. If not, the user may suffer serious
accidents.
17. Noise
Use ear muffs when you use the compressor.
18. Replacing the power cable
To prevent injury, damaged power cables may
only be replaced by the manufacturer or a quali-
fied electrician.
4.2 Safety instructions for working
with copressed air and blasting guns
Compressors and lines reach high tempera-
tures during operation. Avoid contact! Risk of
burns!
14
OPERATING INSTRUCTIONS
Gases or vapours drawn in by the compressor
When you disconnect the hose coupling, hold
Wear goggles when working with the blowout
Never point the blow-out gun at other persons
4.3. Safety information for paint
spraying
Never process paints or solvents with a flash
Do not heat lacquers and solvents as they are
It is imperative to use filtering equipment (face
Smoking is prohibited during the spraying
Make sure there are no open fires or open
Do not keep or consume food and drink in the
The details and designations of the Ordi-
The work room has to be bigger than 30 m
have to be kept free of constituents that may
cause fire or explosions inside the compres-
sor.
the coupling element in your hand to prevent
injury from the whiplashing hose.
gun. Injuries may easily result from foreign
bodies and blasted parts.
and never use it to clean clothes that are still
being worn.
point below 55°C.
highly inflammable.
masks) when processing harmful liquids. Note
also the information
concerning safety precautions published by
the manufacturers of these liquids.
operation and in the work room. Paint vapours
are highly flammable.
lights in the work room. Sparking machines
are not to be used.
work room. Paint vapours are harmful.
nance on Hazardous Substances, which are
displayed on the outer packaging of the pro-
cessed material, must be observed. Additional
protective measures are to be undertaken if
necessary, particularly the wearing of suitable
clothing and masks.
3
Advertenties
Inhoudsopgave
