CONTENTS | SPECIAL INFOrMATION
SPECIAL INFORMATION
1.
1.1
1.2
1.3
2.
Safety �������������������������������������������������������� 13
2.1
Intended use ����������������������������������������������������� 13
2.2
Safety instructions ���������������������������������������������� 14
2.3
Test symbols ����������������������������������������������������� 14
3.
3.1
Operation ��������������������������������������������������������� 14
4.
5.
6.
Safety �������������������������������������������������������� 15
6.1
6.2
6.3
7.
7.1
8.
Preparation ������������������������������������������������� 15
8.1
9.
Installation �������������������������������������������������� 16
9.1
9.2
9.3
9.4
10.
10.1
10.2
11.
12.
12.1
13.
Maintenance ������������������������������������������������ 17
13.1
13.2
13.3
13.4
13.5
13.6
13.7
13.8
pipe ���������������������������������������������������������������� 18
14.
Specification ������������������������������������������������ 19
14.1
14.2
14.3
14.4
14.5
14.6
14.7
Data table �������������������������������������������������������� 21
GUARANTEE | ENVIRONMENT AND RECYCLING
www.stiebel-eltron.com
SPECIAL INFOrMATION
- The appliance may be used by children over 3
years of age and persons with reduced physi-
cal, sensory or mental capabilities or a lack of
experience and expertise, provided that they
are supervised or they have been instructed
on how to use the appliance safely and have
understood the potential risks. Children aged
3 to 8 years may only operate the tap con-
nected to the appliance. Children must never
play with the appliance. Children must never
clean the appliance or perform user mainte-
nance unless they are supervised.
- When permanently connected to the power
supply using a dedicated junction box, the ap-
pliance must be able to be isolated from the
mains power supply by an isolator that dis-
connects all poles with at least 3 mm contact
separation.
- The power cable may only be replaced (for
example if damaged) by a qualified contrac-
tor authorised by the manufacturer, using an
original spare part.
- Secure the appliance as described in chapter
"Installation / Installation".
- Observe the maximum permissible pressure
(see chapter "Installation / Specification / Data
table").
- The appliance is pressurised. During the heat-
up process, expansion water will drip from
the safety valve.
- Regularly activate the safety valve to prevent
it from becoming blocked, e.g. by limescale
deposits.
- Drain the appliance as described in chapter
"Installation / Maintenance / Draining the
appliance".
- Install a type-tested safety valve, or safety as-
sembly containing such a safety valve, in the
cold water supply line.
- Size the drain pipe so that water can drain
off unimpeded when the safety valve is fully
opened.
ESH 10 U-P Plus | ESH 10 O-P Plus |
13