Inhoudsopgave
Advertenties
OPERATION
Descale the steam system
When you have run several steam pro-
grammes, a flashing message "P10S" will
be shown on the display and the
indicators will flash. This message prompts
you to descale the system. Select P10S from
the list of pre-set programmes to descale the
appliance. You can skip descaling twice, by
touching the
sensor. However, eventual-
ly the appliance will not allow you to run a
steam programmes again until you descale
the appliance.
Descale the appliance.
•
Prepare the solution of 450 ml of water
and 50 ml of liquid descaling agent.
•
Pour the solution into the water contain-
er drawer.
•
Touch OK to start the "Descale" pro-
gramme. The
be on and P10S is blinking.
NOTE: During the descaling programme,
you will need to drain water from the steam
system 3 times.
Drain the descaling solution from the system
when you hear a beep and the
is flashing.
•
Open the oven door.
•
Then place deep baking tray under the
water drain.
•
Press OK to drain the remaining des-
caling solution from the steam system.
Pour the solution out of the baking tray
and rinse it with water.
To rinse the steam system, pour 0.5 l of clean
water into the water container drawer and
touch OK to continue the programme. The
and
indicators will be on and P10S
is blinking.
Drain the descaling solution from the system
when you hear a beep and the
is flashing.
•
Open the oven door.
•
Then place deep baking tray under the
water drain.
and
and
indicators will
indicator
indicator
•
Press OK to drain the remaining des-
caling solution from the steam system.
Pour the solution out of the baking tray
and rinse it with water.
Descaling is complete and the
cators flash. Touch OK to exit the programme.
IMPORTANT: If water is dripping from the
drain tube during the steam programme, flush
the system. When the appliance is on but no
function is active:
•
Place at least 1 litre container under the
drain.
•
Pour 0.5 litres of water into the water
container drawer.
•
Simultaneously touch
drain water out of the system.
•
Repeat this procedure twice.
If the problem persists, descale the app-
liance.
IMPORTANT: If you notice scale draining
from the steam system after the completed
steam programme, select the P10S program-
me from the list and follow the descaling
instructions.
If you pour water into the container but decide
not to run a steam programme, you can touch
and OK to drain water from the steam
system. You can touch OK at any time to stop
draining the water.
90
and
indi-
and OK and
Advertenties
Inhoudsopgave
