Inhoudsopgave
Advertenties
OPERATION
Active functions*
Quick pre-heat
ECO active
Kitchen Timer active
Delayed timed operation
Timed operation
Child Lock Active
Oven pre-heat active
Steam cleaning active
Add water symbol
Drain water symbol
* depending on model
Connect the power supply
When you connect the power supply (or
power is restored after a power outage) the
appliance will prompt to set the current time,
will flash on the display. You must set the
current time to use the appliance.
Note: In the event of a power outage, all
settings such as Duration, Temperature and
Heating Function will be lost. You will need
to re-enter the settings to continue cooking.
If the pyrolytic cleaning is interrupted (or the
door is locked for any other reason), the oven
will start the cooling and door opening proce-
dure before you can set the time.
Set the current time
When you connect the appliance to the po-
wer supply, the minutes
play. Use
and
flash on the dis-
to set the current time.
Touch
once to switch to the hour digits
and then use
time. Touch
time. You will hear a beep when the current
time is stored in the appliance. To change
the current time in the Standby mode, touch
and hold
. The
the display. Touch the
and the digits will start to flash. Now you can
proceed to set the current time.
The display brightness.
The LED display brightness varies depending
on the time of day. The display is dimmed
during 22:00 to 06:00 and its brightness is
normal during 06:00 to 22:00. Also, the dis-
play is brighter when active than when the
appliance is in Standby mode. The display
brightness and display dimming times cannot
be changed.
Lighting
The lighting turns on each time you open the
oven door. The lighting also turns on when
the oven is in active mode. This lighting is off
in Standby mode. If the oven door remains
open for a long time, the lighting will auto-
matically turn off after about 10 minutes.
Cooling fan
Cooling fan operates independently of the
set functions and the appliance mode. The
cooling fan activates automatically when
any function is activated. The cooling fan
operates as long as the oven cavity temper-
ature exceeds 80°C.
perature, the cooling fan turns off.
83
and
to set the current
again to confirm the current
symbol will be show on
sensor once again
Below this tem-
Advertenties
Inhoudsopgave
