Inhoudsopgave
Advertenties
OPERATION
the oven cavity. Touch
set temperature. Touch again to displaying
the current time.
To adjust the set temperature, touch and hold
and the currently set temperature will be dis-
played. Use
and
Touch
to confirm the new temperature. The
new temperature is not set until confirmed.
To change the oven function during oven
operation, touch and hold the
currently set oven function will be displayed.
Use
and
to select a new oven func-
tion. When you confirm the new function, the
temperature will be displayed (currently set
temperature, not the default temperature for
a given oven function). Use
adjust the temperature as needed. Touch
to confirm and the appliance will operate with
the new settings.
End oven function
Touch and hold
By default the oven functions operate indefini-
tely, but you can set the oven to turn off using
timed operation function of delayed timed
operation function. The only exception is the
pyrolytic cleaning function, which cannot be
modified.
Timed operation
In this mode the oven will turn off after a set
duration. You can set the duration from 1
minute to 10 hours. To set timed operation
for any oven function, touch and hold the
sensor, and the
the display. Touch the
display will show the
Use
to set the duration and touch
confirm.
Use
and
to adjust the time settings.
again to check the
to adjust it as needed.
sensor and
and
to end the oven function.
timer symbol flashes in
sensor again, the
symbol. Now you can:
Touch
to confirm the adjusted setting.
To cancel timed operation use
duration down to
confirm.
Timed operation will interrupt the active oven
function. When the set Duration has elapsed,
you will hear beeping. Touch any sensor
except
to mute the beeping. When the
beeping is muted the appliance enters the
operation mode.
Note: When you use the
the beeping, the appliance will allow you to
adjust the Duration time.
Delayed timed operation
to
You can set the oven to start at a specific
time and operate for a set Duration. You
can delay the oven start from 1 minute to 10
hours, and set the Duration for up to 10 hours.
To activate the delayed timed operation, first
set the timed operation. Then touch and hold
the
sensor again and the timer
will flash on the display. Touch the
twice, and the
display. Now you can:
Use
to set the time for the oven to turn off
and then touch
Correct the oven on time with the sensors
and
. Touch
setting.
To cancel timed operation use
duration down to the lowest possible value
and touch
Timed operation will interrupt the active oven
function. When the set time has elapsed, you
will hear beeping. Touch any sensor to mute
the beeping. When the beeping is muted the
appliance enters the operation mode.
Pre-set programmes
to
These are programmes with specific settings
of function, temperature and duration that are
86
and touch
sensor to mute
pictogram will flash on the
to confirm.
to confirm the adjusted
to confirm.
to adjust
to
symbol
sensor
to adjust
Advertenties
Inhoudsopgave
