OPERATION
Before first use
•
Remove all packaging elements, par-
ticularly those protecting the interior of
the oven chamber during transport.
•
Remove all the accessories from inside
of the oven and wash them thoroughly
in warm water with gentle washing up
liquid.
•
Remove the protective foil from the sur-
faces of the telescopic runners.
•
Use warm water with the addition of
mild detergent to wash the inside of the
chamber. Do not use hard brushes or
sponges. They could damage the coat-
ing of the inside of the chamber.
Control Panel
On/off switch
is on the right side of the dis-
play. To activate the On/off switch, touch the
glass in the place indicated by a pictogram.
An acoustic signal will be heard, which was
selected in the menu. (See section: Control
panel).
Touch sensor surfaces must be kept clean.
Warm up the oven chamber
•
Turn on the ventilation in the room or
open a window.
•
Turn the function selector knob and set
the position
description of these functions later in
the instructions).
Rotate the temperature adjustment knob
and set the temperature to 250°C. The
oven should operate for a minimum of 30
minutes; while it is operating the oven pro-
duces a smell, which is only present at the
beginning but will eventually go away as the
appliance is used. This is perfectly normal
and is part of the process of warming up the
oven chamber.
81
or
(there is a detailed