Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
9.5 Edit Satellites
Use the
/
keys to select the „Satellite
Settings" item in the Channel menu if you want
to view or change the satellite configuration.
The list of saved satellites appears (on the left
of the screen) and you can see the parameters
of the selected satellite after selecting it on the
right of the screen.
Select the desired satellite with the
tons. If you want to change data of the satellite
(not advisable!), you can enter this in this menu.
LNB Type:
Indicates the type of LNB. Here you can select the intermediate frequencies
of the LNB. Default is 09750/10600.
22KHz:
Select whether the 22KHz is sent to the LNB (Off, On, Auto).
Unicable:
If the TV is operated on a multi-subscriber system with Unicable protocol,
make the appropriate settings here.
DISEqC1.0/1.1/1.2: If, for example, you are using a monoblock LNB with integrated
If, for example, you are using a monobloc LNB with an integrated
multi-switch or if you are operating the TV set on a multi-switch to which
several LNBs for diffe rent satellites are connected, you must specify here the
number (LNB1, 2, 3 or 4) of this satellite in the multi-switch.
DISEqC 1.2 enables the motor control.
Motor:
If you use a DiSEqC motor control, it can be switched on here. This has
nothing to do with the use of automatic antennas. With the „OK" key, you
can select the type of motor control „Standard" or „Nonstop" as well as
limits in the east and west. For details, please refer to your specific motor
control.
If you want to change or add a transponder of the satellite, select the item „TransPonder"
in the satellite parameters and press „OK". A screen with the transponder list of the satellite
appears (left picture). There you also select the transponder with the
9.6. CI-Information
In the PROGRAMME menu, select the menu
item „CI Information" with the
This is only enabled if there is a CI+ decoding
module in the CI+ slot of the TV set.
A window opens and shows the module. By
pressing OK, you can access the specific menu
of this module and, for example, update the
software of the module.
48
/
but-
/
keys.
/
keys.
Advertenties
Hoofdstukken
Inhoudsopgave
