Download Inhoudsopgave Inhoud Print deze pagina

Commissioning; Wall Mounting With A Vesa Bracket; Mounting The Stand - Berger LED Smart Camping-TV Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

If you use headphones at a high volume for a long time, this can damage your hearing. You can
also connect e.g. the „Line In" input of a car radio to this socket instead of headphones if you
want to play back the TV sound via the car radio.
4.7 Connecting to a Coaxial Sound Input
Via the „coaxial" output of your TV (if provided by the input source), the sound signal is output
digitally and can be played back e.g. via a 5.1 home cinema system. To do this, connect an am-
plifi er with the coaxial input to the „Coaxial" output on your TV set using a coaxial cable.

Commissioning

Before putting your TV set into operation, please connect it to a suitable power supply. For your
convenience, we have already installed a channel list for satellite reception in the factory. There-
fore, you do not need to perform a channel search for SAT reception.

4.8 Wall mounting with a VESA bracket

If the device is to be permanently mounted in a vehicle or on a wall, please do this only by me-
ans of an appropriate VESA mount. For this purpose, the device has standardized standardized
mounting points on the rear panel according to the following table:
Device size
19", 22", 24", 27"
32"
Always use 4 screws with the appropriate thread for mounting.When mounting, make sure that
the device is securely fi xed to the wall mount.The screw length depends on the wall mounting.
Be sure to use screws of the correct length. Do not overtighten the screws, as this may cause
damage to the TV and void your warranty. warranty.

4.9 Mounting the stand

As an alternative to mounting on a wall or in a vehicle, the TV set can also be mounted on a
stand. For this purpose, the appropriate mounting screws are included. When mounting the
stand, make sure that the screws are not overtightened. Also ensure that no fi ngers or objects
are placed between the two components during assembly. Otherwise there is a danger of being
crushed! For the assembly of the screws you need a Phillips screwdriver.
VESA-Standard
100 x 100
100 x 200
GB
Screws
M4
M6
39

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

340970359320359800359810359820

Inhoudsopgave