Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
With „Automatic search", the entire frequency
band is searched and all stations are stored in
the memory.
With „Manual search", enter the channel and
the programmes on this channel are stored.
The corresponding frequency is displayed but
cannot be selected.
9.3 Satellite reception (DVBS)
Select „DVBS" from the input sources and
confirm with „OK". Then press the „MENU"
key and select „Programme". Confirm with
„OK" and you reach the screen for search and
antenna voltage. Set the antenna voltage to
„Off". Since satellite reception is somewhat
more complex than DVB-C or DVB-T reception,
we will go into this in more detail below.
Hint:
A SAT scan overwrites the previous channel list and a new channel list is loaded which is stored
in alphabetical order. Afterwards, you must sort all the channels manually into the desired order.
Alternatively, you can carry out an „Automatic
Search" with the search mode „Preset Scan"
and reload the programme list of the factory
setting with „Search" and „OK".
If you select „Fast Scan" or „Joyne Scan" as
the search mode, you must now select the
desired country (Austria in this example) to
load the corresponding programme list. The
correct provider is set automatically (here: HD
Austria). Go to „Search" and press „OK". The
desired channel list is now loaded if your SAT
antenna is aligned to the correct satellite (here:
ASTRA1).
46
Advertenties
Hoofdstukken
Inhoudsopgave
