Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.1 Power connection
1. connect the supplied 12V cable to your on-board power supply. If you want to operate the
television on the 230V mains, use the mains adapter.
DC IN
2. Connect the round hollow plug of the 12V cable or the mains adapter to the „DC IN" socket
of the TV and switch on the 12V supply of the vehicle or insert the mains plug of the mains
adapter into the 230V socket. 2.
3. Turn the main switch of the TV to „on" and then press the POWER button on the remote
control or on the back of the unit to switch on the TV.
When you press the POWER key on the remote control or on the TV set, the internal systems
are started first and the TV picture appears after about 12 seconds. However, the LED imme-
diately signals that the television has been switched on by changing colour from red to
green.
4.2 Connecting the antenna cable
Connect the antenna cable of a terrestrial antenna or a cable connection to the „RF T2" socket
or the cable of a SAT antenna to the input „RF S2".
Notice:
To be able to receive TV programmes, a signal must be detected at one of the two RF inputs.
Before connecting external devices, read the documentation belonging to the unit.
Note:
Before connecting external devices, switch off the TV or disconnect it from the power supply for
safety reasons.
4. CONNECTING THE TELEVISION
DVB-S/S2
DVB-C/T2
GB
37
Advertenties
Hoofdstukken
Inhoudsopgave
